A/C Cut-off Control System Inspection

Start the engine.
Turn the A/C switch and fan switch on.
Verify that the A/C compressor magnetic clutch actuates.
- If it does not actuate, perform the symptom troubleshooting "NO. 23 A/C DOES NOT WORK SUFFICIENTLY". (Refer to NO. 23 A/C DOES NOT WORK SUFFICIENTLY .)
Fully open the throttle valve and verify that the A/C compressor magnetic clutch does not actuate for 2-5 s .
- If it actuates, inspect the following:
  - A/C relay (Refer to RELAY INSPECTION .)
  - Open or short to ground in wiring harness and connectors (Front body control module (FBCM)-A/C relay-PCM terminal 2AF)
  - A/C related parts
  - APP1, APP2 PIDs (Refer to PCM INSPECTION .)