Diagnostic Procedure
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | VERIFY DSC HU/CM DTC
|
Yes | Go to the applicable DTC inspection. (Refer to ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)] .) |
| No | Go to the next step. | ||
| 2 | VERIFY INSTRUMENT CLUSTER REPAIR HISTORY
|
Yes | Perform the instrument cluster configuration, then go to Step 6. (Refer to INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA) .) |
| No | Go to the next step. | ||
| 3 | VERIFY AUTOMATIC TRANSMISSION REPAIR HISTORY
|
Yes | Perform the TCM configuration. (Refer to TCM CONFIGURATION [FW6A-EL] .) |
| No | Go to the next step. | ||
| 4 | VERIFY FREEZE FRAME DATA/SNAPSHOT DATA HAS BEEN RECORDED
|
Yes | Go to the next step. |
| No | Record the freeze frame data/snapshot data on the repair order, then go to the next step. | ||
| 5 | VERIFY RELATED REPAIR INFORMATION AVAILABILITY
|
Yes | Perform repair or diagnosis according to the available repair information.
Go to the next step. |
| No | Replace the control valve body, then go to the next step. (Refer to CONTROL VALVE BODY REMOVAL/INSTALLATION [FW6A-EL] .) |
||
| 6 | VERIFY DTC TROUBLESHOOTING COMPLETED
|
Yes | Go to the applicable DTC inspection. (Refer to ON-BOARD DIAGNOSTIC SYSTEM DTC TABLE [FW6A-EL] .) |
| No | DTC troubleshooting completed. | ||