Push Button Start Inspection

Remove the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
Verify that the continuity between the push button start terminals is as indicated in the table.

Fig 1: Push Button Start Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.
- If the continuity can be verified as indicated in the table, go to the next step.
- If not as indicated in the table, replace the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
Apply battery positive voltage and connect the ground to the push button start terminals and verify that the LED illuminates as indicated in the table.

Fig 2: Applying Battery Positive Voltage To Push Button Start Terminals
Courtesy of MAZDA MOTORS CORP.
- If the LED does not illuminate as indicated in the table, replace the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)