DTC Memory Clearing Procedure
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- Select "Self Test".
- Select "All DTCs".
- Verify the DTC according to the directions on the screen.
- Press the clear button on the DTC screen to clear the DTC.
- Switch the ignition to off.
- Switch the ignition ON (engine off or on) and wait for 5 s or more .
- Perform DTC inspection. (See DTC INSPECTION [POSITION MEMORY SYSTEM] .)
- Verify that no DTCs are displayed.