No. 5 DSC*2 Operates Frequently/DSC Does Not Work Correctly *2: TCS/DSC Indicator Light Goes On And Off While DSC Operates: Notes
NO. 5 DSC*2 OPERATES FREQUENTLY/DSC DOES NOT WORK CORRECTLY *2 (DYNAMIC STABILITY CONTROL) POSSIBLE CAUSE
| 5 |
DSC*2 operates frequently
DSC does not work correctly*2: TCS/DSC indicator light goes on and off while DSC operates |
| POSSIBLE CAUSE |
- DSC HU/CM detected malfunction. (Input and output device malfunction)
- There is a difference in size or air pressure between front or rear tires.
- Poor installation with SAS control module (yaw rate sensor, low-G (XY) sensor) and/or steering angle sensor (If any of the above sensors are poorly installed, DSC may operate intermittently.)
- When replacing DSC HU/CM or steering angle sensor initialization is not performed. (If initialization is not performed correctly, DSC may not work correctly.)
- Incorrect ABS wheel speed sensor is inputted to DSC HU/CM.
|