TPMS Reset Procedures: Notes

NOTE: Whenever tires or wheels are changed (including changing to and from winter tires) where a new sensor is installed, the tire pressure sensor's unique ID signal code must be registered with TPM system. Tire pressure sensor ID registration is achieved automatically once vehicle has been stationary for 15 minutes or more, and then drivin at a speed of at least 16 mph (25 km/h) for 10 minutes or more.

NOTE: The TPM system is not affected by wheel and tire rotation.

When the tire pressure warning light illuminates and the warning beep sound is heard, check tire pressure and adjust as necessary. After adjusting the tire air pressures, it may require some time for the warning light to go out. If the warning light remains illuminated, drive the vehicle at a speed of at least 16 mph (25 km/h) for 10 minutes, and then verify that it goes out.