DTC U1007-68; Communication Error With Current Sensor: Notes

DETECTION CONDITION & POSSIBLE CAUSES

Description	Communication error with current sensor
Detection condition	Front body control module (FBCM) could not receive signals from the current sensor for 5 s or more with the ignition switched ON (engine off or on).
Fail-safe function	Not applicable
Possible cause	Current sensor connector or terminal malfunction Current sensor power supply circuit malfunction Short to ground in wiring harness between ENG.+B 7.5 A fuse and current sensor terminal A ENG.+B 7.5 A fuse malfunction MAIN 200 A fuse malfunction Open circuit in wiring harness between battery positive terminal and current sensor terminal A Front body control module (FBCM) connector or terminal malfunction Short to ground in wiring harness between current sensor terminal B and front body control module (FBCM) terminal 2E Open circuit in wiring harness between current sensor terminal B and front body control module (FBCM) terminal 2E Current sensor malfunction Front body control module (FBCM) malfunction