LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 6 Touring, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> On-Board Diagnostic - Adaptive Front Lighting System Control Module >> DTC U0001:88/U0100:00/U0131:00/U0140:00/U0155:00 [Adaptive Front Lighting System (AFS) Control Module] >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0001:88/U0100:00/U0131:00/U0140:00/U0155:00 [Adaptive Front Lighting System (AFS) Control Module]: Notes

DTC U0001:88/U0100:00/U0131:00/U0140:00/U0155:00 (ADAPTIVE FRONT LIGHTING SYSTEM CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location U0001:88
  • Unit communication error (HS-CAN)

U0100:00
  • Communication error with PCM

U0131:00
  • Communication error with EPS control module

U0140:00
  • Communication error with front body control module (FBCM)

U0155:00
  • Communication error with instrument cluster
Detection condition
  • U0001:88
    • The AFS control module detected CAN bus communication line (HS-CAN) malfunction ten times continuously.
  • U0100:00
    • The AFS control module could not receive CAN signal from the PCM for 5 s or more.
  • U0131:00
    • The AFS control module could not receive CAN signal from the EPS control module for 5 s or more.
  • U0140:00
    • The AFS control module could not receive CAN signal from the front body control module (FBCM) for 5 s or more.
  • U0155:00
    • The AFS control module could not receive CAN signal from the instrument cluster for 5 s or more.
Fail-safe
  • U0001:88
    • The swivel actuator is moved to the center.
      • The headlight leveling actuator is stopped at the position when the malfunction is determined.
  • U0100:00
    • The swivel actuator is moved to the center.
      • The headlight leveling actuator is stopped at the position when the malfunction is determined.
  • U0131:00
    • The swivel actuator is moved to the center.
      • Control of the headlight auto leveling system is continued.
  • U0140:00
    • The swivel actuator is moved to the center.
      • The headlight leveling actuator is stopped at the position when the malfunction is determined.
  • U0155:00
    • The swivel actuator is moved to the center.
      • Control of the headlight auto leveling system is continued.
Possible cause
  • Malfunction in CAN bus communication line
  • Malfunction in CAN communication line between PCM and AFS control module
  • Malfunction in CAN communication line between EPS control module and AFS control module
  • Malfunction in CAN communication line between front body control module (FBCM) and AFS control module
  • Malfunction in CAN communication line between instrument cluster and AFS control module
System wiring diagram -
scientia non olet · About LEMON Manuals