DTC P061B-00; Internal Control Module Torque Calculation Performance Problem: Notes
DETECTION CONDITION & POSSIBLE CAUSE
| DTC P061B:00 |
Internal control module torque calculation performance problem |
| DETECTION CONDITION |
- Indicates an error occurred in the PCM.
- There is a malfunction in the sensor input signal to the PCM.
Diagnostic support note
- This is a continuous monitor (CCM).
- The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- DTC is stored in the PCM memory.
|
| FAIL-SAFE FUNCTION |
- Restricts the upper limit of the engine speed.
|
| POSSIBLE CAUSE |
- PCM connector or terminals malfunction
- PCM malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |