LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 6 Touring, Automatic Trans >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag System (Service Information) - Standard Deployment Control System >> Air Bag Module And PRETENSIONER Seat Belt Deployment Procedures [Standard Deployment Control System] >> Deployment Procedure for Outside of Vehicle >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Deployment Procedure for Outside of Vehicle: Notes

  1. Inspect the SST (Deployment tool). (See INSPECTION OF SST (DEPLOYMENT TOOL) [STANDARD DEPLOYMENT CONTROL SYSTEM] .)
  2. Switch the ignition off.
  3. Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  4. Follow the procedure below for operating (deploying) the applicable air bag module or pretensioner seat belt.
NOTE:
  • The connector part of the air bag module and the SST (adapter wiring harness) burns out from the high heat when the inflator is operated (deployed).
scientia non olet · About LEMON Manuals