LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 6 Touring, Automatic Trans >> Repair and Diagnosis (Single Page) >> Steering >> Electronic Steering >> Electric Power Steering System >> EPS Control Module Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EPS Control Module Inspection: Notes

  1. Remove the driver-side front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
  2. Remove the driver-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove the upper panel. (See UPPER PANEL REMOVAL/INSTALLATION .)
  4. Remove the shift lever knob (MTX vehicles). (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R] .)
  5. Remove the selector lever knob (ATX vehicles). (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  6. Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
  7. Remove the rear console. (See REAR CONSOLE REMOVAL/INSTALLATION .)
  8. Remove the front console box. (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
  9. Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION .)
  10. Remove the front console. (See FRONT CONSOLE REMOVAL/INSTALLATION .)
  11. Disconnect the hood release lever from the lower panel. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
  12. Remove the fuel-filler lid opener lever. (See FUEL-FILLER LID OPENER AND LEVER REMOVAL/INSTALLATION .)
  13. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
  14. Remove the driver-side front heat duct. (See FRONT HEAT DUCT REMOVAL/INSTALLATION .)
  15. Attach the tester lead to the underside of the EPS CM connector and inspect the voltage according to the terminal voltage table (reference).
scientia non olet · About LEMON Manuals