Clock Spring Adjustment [Two-Step Deployment Control System]

1. Set the front wheels straight ahead.
   CAUTION:

   • The clock spring will break if over-wound. Do not forcibly turn the clock spring.
2. Turn the clock spring clockwise until it stops.
   Fig 1: Adjusting Clock Spring (Two-Step Deployment Control System)

   Courtesy of MAZDA MOTORS CORP.
3. From the stopped position, turn the clock spring counterclockwise approx. 2 turns.
   Fig 2: Turning Clock Spring Counterclockwise

   Courtesy of MAZDA MOTORS CORP.
4. Align the mark on the clock spring with the mark on the outer housing.

Fig 3: Aligning Mark On Clock Spring With Outer Housing

Courtesy of MAZDA MOTORS CORP.

Fig 4: Adjusting Alignment Marks With Guides

Courtesy of MAZDA MOTORS CORP.

NOTE:

• After adjusting the alignment marks, the guides can be verified in the viewing slots shown in the figure.