Section 38 (Conventional Brake System)

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

Conventional Brake System Location Index
- Vehicle Front Side
- Vehicle Rear Side
Brake Fluid Inspection
Brake Fluid Air Bleeding
Vacuum Line Inspection
Vacuum Hose Removal/Installation
- Notes
- Vacuum Hose Installation Note
Brake Pedal Inspection
- Pedal Height Inspection
- Pedal Play Inspection
- Pedal-to-floor Clearance Inspection
Brake Pedal Removal/Installation
- Notes
- Brake Pedal Removal Note
- Nut Installation Note
- Snap Pin Installation Note
- Brake Switch Installation Note
Brake Switch Inspection
Master Cylinder Removal/Installation
Brake Fluid Level Sensor Inspection
Power Brake Unit Inspection
- Notes
- Without Using SST
- Using SST
Power Brake Unit Removal/Installation
- Notes
- Snap Pin Installation Note
Vacuum Pump Inspection
Vacuum Pump Removal/Installation
- Notes
- Vacuum Pump Removal Note
- Vacuum Pump and O-ring Installation Note
Front Brake (Disc) Inspection
- Brake Judder Repair Hints
Front Brake (Disc) Removal/Installation
- Notes
- Guide Plate Installation Note
- Disc Pad Installation Note
Disc Pad (Front) Replacement
- Notes
- Caliper Installation Bolt Removal Note
- Guide Plate Installation Note
- Disc Pad Installation Note
- Caliper Installation Bolt Installation Note
Caliper (Front) Disassembly/Assembly
- Notes
- Piston Disassembly Note
Brake Hose (Front) Removal/Installation
Rear Brake (Disc) Inspection
- Brake Judder Repair Hints
Rear Brake (Disc) Removal/Installation
- Notes
- Caliper Installation Note
Disc Pad (Rear) Replacement
Caliper (Rear) Disassembly/Assembly
Brake Hose (Rear) Removal/Installation