DTC U2300-55: Instrument Cluster Configuration Not Implemented: Notes
WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
| Description |
Instrument cluster configuration not implemented |
| Detection condition |
- The adaptive front lighting system (AFS) control module received a signal which indicates the instrument cluster configuration is not performed.
|
| Fail-safe |
- The swivel actuator is moved to the center.
- The headlight leveling actuator is stopped at the position when the malfunction is determined.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the adaptive front lighting system (AFS) control module to the adaptive front lighting system (AFS) control module, 30 s or more
need to have elapsed since the ignition was switched ON (engine off or on).
- Instrument cluster configuration is not completed.
- Instrument cluster malfunction
- Adaptive front lighting system (AFS) control module malfunction
|
| System wiring diagram |
Not applicable |