LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> On-Board Diagnostic - Front Body Control Module (FBCM) >> DTC U0338-09: Error Light Switch Signal Received From Start Stop Unit >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0338-09: Error Light Switch Signal Received From Start Stop Unit: Notes

DTC U0338:09 (FRONT BODY CONTROL MODULE (FBCM)) DETECTION CONDITION AND POSSIBLE CAUSE

Description Error Light Switch Signal Received From Start Stop Unit
Detection condition
  • Front body control module (FBCM) received the CAN error signals from the start stop unit 3 times with the ignition switched ON (engine off or on).
Fail-safe
  • If DTC U0338:09 is detected when the ignition is switched ON (engine off or on), the headlight LO and the TNS (parking lights) are illuminated.
  • If DTC U0338:09 is cleared, the headlight LO and the TNS (parking lights) are turned off, and the operation returns to normal.
  • Operate the windshield wiper at low speed only.
Possible cause
  • Light switch malfunction
  • Start stop unit malfunction
  • Front body control module (FBCM) malfunction
System wiring diagram Not applicable