Diagnostic Procedure

DTC U0533:81 (360° VIEW MONITOR CONTROLE MODULE) DIAGNOSTIC PROCEDURE

Step	Inspection		Action
1	VERIFY OTHER 360°VIEW MONITOR CONTROL MODULE DTCs Clear the DTC for the 360°view monitor control module using the M-MDS. (See CLEARING DTC (360°VIEW MONITOR CONTROL MODULE) .) Retrieve the 360°view monitor control module DTCs using the M-MDS. (See DTC INSPECTION (360°VIEW MONITOR CONTROL MODULE) .) Is DTC U3000:41 or U3000:49 displayed?	Yes	Replace the 360°view monitor control module, then go to Step 4. (See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	VERIFY BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) STOP UNIT DTCs Retrieve the blind spot monitoring (BSM) control module (LH) DTCs using the M-MDS. (See DTC INSPECTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE] .) Are any DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [BLIND SPOT MONITORING (BSM) CONTROL MODULE] .)
2		No	Go to the next step.
3	VERIFY IF MALFUNCTIONING LOCATION IS BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH) DEPENDING ON REPEATABILITY Clear the DTC for the 360°view monitor control module using the M-MDS. (See CLEARING DTC (360°VIEW MONITOR CONTROL MODULE) .) Retrieve the 360°view monitor control module DTCs using the M-MDS. (See DTC INSPECTION (360°VIEW MONITOR CONTROL MODULE) .) Is the same Pending DTC present?	Yes	Replace the blind spot monitoring (BSM) control module (LH), then go to the next step. (See BLIND SPOT MONITORING (BSM) CONTROL MODULE REMOVAL/INSTALLATION .)
3		No	Go to Step 5.
4	VERIFY THAT REPAIRS HAVE BEEN COMPLETED Clear the DTC for the 360°view monitor control module using the M-MDS. (See CLEARING DTC (360°VIEW MONITOR CONTROL MODULE) .) Retrieve the 360°view monitor control module DTCs using the M-MDS. (See DTC INSPECTION (360°VIEW MONITOR CONTROL MODULE) .) Is the same Pending DTC present?	Yes	Repeat the inspection from Step 1. If the malfunction recurs, replace the 360°view monitor control module. (See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION.) Go to the next step.
4		No	Go to the next step.
5	VERIFY IF OTHER DTCs DISPLAYED Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE (360°VIEW MONITOR CONTROL MODULE) .)
5		No	DTC troubleshooting completed.