LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> On-Board Diagnostic (VIN Y) (2 Of 3) >> DTC P025B-00: Fuel Pump Control Module Circuit Range/Performance Problem >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P025B-00: Fuel Pump Control Module Circuit Range/Performance Problem: Notes

DTC P025B-00 PCM (SKYACTIV-G 2.5T) DETECTION CONDITION AND POSSIBLE CAUSE

DTC P025B-00 FUEL PUMP CONTROL MODULE CIRCUIT RANGE/PERFORMANCE PROBLEM
DETECTION CONDITION
  • When any of the following conditions is met:
    • PCM detects overheating in fuel pump control module.
    • Output duty ratio signal received from PCM is in error.
    • Temperature detection thermistor in fuel pump control module is malfunctioning.
      • Output signal from fuel pump control module is erratic (noise overlap).
Diagnostic support note
  • This is a continuous monitor (CCM).
  • The check engine light does not illuminate.
  • FREEZE FRAME DATA is not available.
  • Snapshot data is available.
  • DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION
  • Stops fuel pump control. (If overheating is detected in fuel pump control module)
POSSIBLE CAUSE
  • Fuel pump control module connector or terminals malfunction
  • PCM connector or terminals malfunction
  • Short to ground in wiring harness between fuel pump control module terminal 1B and PCM terminal 2AP
  • Short to power supply in wiring harness between fuel pump control module terminal 1B and PCM terminal 2AP
  • Open circuit in wiring harness between fuel pump control module terminal 1B and PCM terminal 2AP
  • Fuel pump control module malfunction
  • PCM malfunction
G12204731