LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis (Single Page) >> Steering >> Electronic Steering >> Electric Power Steering System (Service Information) >> Steering Gear And Linkage Assembly >> Boot Band Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Boot Band Assembly Note

  1. Assemble the boot band to the boot.
  2. Crimp the boot band using the SST.
    Fig 1: Crimping Boot Band Using SST
    G11428707Courtesy of MAZDA MOTORS CORP.
  3. Verify that the crimping clearance A is within the specification.

    Specification 

    2.5-3.0 mm {0.10-0.11 in}

    • If crimping clearance A exceeds the specification, reduce SST clearance, and crimp the boot band again.
    • If crimping clearance A is less than the specification, increase SST clearance, and crimp a new boot band.
  4. Rotate the by hand and verify that it is securely installed to the boot band.
scientia non olet · About LEMON Manuals