September 30: LEMON manuals is back up on a temporary server! Slowness is possible
PID/Data Monitor Table (360°View Monitor Control Module)
WARNING: This page is about a different car, the 2018 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
| PID |
Unit/Operation |
Data Contents |
Module Control Terminal |
| CAM_BACK |
NORMAL/Fail |
- NORMAL: Image signal received from rear mount camera is normal.
- Fail: Normal image signal from rear mount camera cannot be received.
|
U, V, X, W |
| CAM_FRONT |
NORMAL/Fail |
- NORMAL: Image signal received from front camera is normal.
- Fail: Normal image signal from front camera cannot be received.
|
Q, R, S, T |
| CAM_LEFT |
NORMAL/Fail |
- NORMAL: Image signal received from side camera (LH) is normal.
- Fail: Normal image signal from side camera (LH) cannot be received.
|
Y, Z, AA, AB |
| CAM_RIGHT |
NORMAL/Fail |
- NORMAL: Image signal received from side camera (RH) is normal.
- Fail: Normal image signal from side camera (RH) cannot be received.
|
M, N, O, P |
| VMC_SW |
Off/On |
- Off:360°view monitor switch is not pressed.
- On:360°view monitor switch is pressed.
|
AE, AF |
| VPWR |
V |
Displays the power supply voltage. |
A |
| VPWR_ST |
NORMAL/Fail |
- NORMAL: Power supply status to camera is normal.
- Fail: Power supply status to camera is not normal.
|
M, Q, U, Y |