September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID ECT. (See On-board Diagnostic Test
.) (See PCM Inspection .)
- Compare the voltage and temperature indications for the PID ECT with the standard in the table indicated below.
VOLTAGE SPECIFICATION - STANDARD
| ECT |
| V |
°C {°F} |
| Approx. 3.10 |
20 {68} |
| Approx. 2.16 |
40 {104} |
| Approx. 1.40 |
60 {140} |
| Approx. 0.87 |
80 {176} |
| Approx. 0.54 |
100 {212} |