Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID ECT and ECT2_V. (See On-board Diagnostic Test .) (See PCM Inspection .)
- Compare the voltage indications for PID ECT2_V and the temperature indications for PID ECT with the standards in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See RESISTANCE INSPECTION .)
VOLTAGE SPECIFICATION - STANDARD
| ECT2_V [V] | ECT [°C {°F}] |
|---|---|
| Approx. 3.10 | 20 {68} |
| Approx. 2.16 | 40 {104} |
| Approx. 1.40 | 60 {140} |
| Approx. 0.87 | 80 {176} |
| Approx. 0.54 | 100 {212} |