Electronic Control Throttle Operation Inspection: Notes

Connect the M-MDS to the DLC-2.
Perform the KOEO or KOER self test. (See KOEO/KOER Self Test .)
Verify that none of the following DTCs are displayed:
- P0122:00, P0123:00, P0222:00, P0223:00, P0638:00, P2101:00, P2107:00, P2109:00, P2110:00, P2112:00, P2119:00, P2122:00, P2123:00, P2127:00, P2128:00, P2135:00, P2138:00
  - If any one DTC is displayed, perform the DTC inspection. (See DTC TABLE [PCM (SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION))] .)
Access the following PCM PIDs using the M-MDS. (See On-board Diagnostic Test .)
- ETC_ACT
- ETC_DSD
With the accelerator pedal not depressed and with it depressed to the floor, verify that the data monitor item ETC_ACT value changes in conjunction with the ETC_DSD value.
- If this change cannot be verified, perform the Resistance Inspection for the throttle body. (See Throttle Body Inspection .)