October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Electric Variable Valve Timing Driver Control System Inspection
- Connect the M-MDS to the DLC-2.
- Perform the KOER self test. (See KOEO/KOER Self Test
.)
- Verify that DTC P0010:00 or P1380:00 is not displayed. (See On-board Diagnostic Test
.)
- Perform the Drive Mode 03 (Variable Valve Timing, A/F Sensor Heater, HO2S Heater, A/F Sensor, HO2S and TWC Repair Verification Drive Mode). (See OBD-II Drive Mode
.)
- Verify that DTC P0011:00 or P0012:00 is not displayed. (See On-board Diagnostic Test
.)
- Access the following PCM PIDs using the M-MDS. (See On-board Diagnostic Test
.)
CAUTION:
- While performing this step, always operate the vehicle in a safe and lawful manner.
- When the M-MDS is used to observe monitor system status while driving, be sure to have another technician with you, or record the data in the M-MDS using the PID/DATA MONITOR AND RECORD capturing function and inspect later.
- Accelerate and decelerate the vehicle, and drive at normal speed, and verify that the data monitor item VT_IN_ACT value changes in conjunction with the VT_IN_DES value.