LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-9 Signature >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Security And Locks >> Immobilizer System-Related Parts Programming >> No. 3 Programming Procedure When Start Stop Unit Is Replaced Or When Start Stop Unit And PCM Are Replaced Simultaneously >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

No. 3 Programming Procedure When Start Stop Unit Is Replaced Or When Start Stop Unit And PCM Are Replaced Simultaneously: Notes

CAUTION:
  • The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
  • Because it is necessary to program two or more remote transmitters to the immobilizer system-related parts to start the engine, perform the remote transmitter programming after clearing the remote transmitter.
NOTE:
  • Before beginning the procedure, verify that the customer has provided all of the remote transmitters for the vehicle.
  • The engine cannot be started unless two or more remote transmitters are programmed after the replacement.
scientia non olet · About LEMON Manuals