LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2018 >> CX-9 Signature >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> On-Board Diagnostic - 360 Degrees View Monitor Control Module >> PID/Data Monitor Table (360°View Monitor Control Module)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PID/Data Monitor Table (360°View Monitor Control Module)

PID Unit/Operation Data Contents Module Control Terminal
CAM_BACK NORMAL/Fail
  • NORMAL: Image signal received from rear mount camera is normal.
  • Fail: Normal image signal from rear mount camera cannot be received.
 U, V, X, W
CAM_FRONT NORMAL/Fail
  • NORMAL: Image signal received from front camera is normal.
  • Fail: Normal image signal from front camera cannot be received.
 Q, R, S, T
CAM_LEFT NORMAL/Fail
  • NORMAL: Image signal received from side camera (LH) is normal.
  • Fail: Normal image signal from side camera (LH) cannot be received.
 Y, Z, AA, AB
CAM_RIGHT NORMAL/Fail
  • NORMAL: Image signal received from side camera (RH) is normal.
  • Fail: Normal image signal from side camera (RH) cannot be received.
 M, N, O, P
VMC_SW Off/On
  • Off:360°view monitor switch is not pressed.
  • On:360°view monitor switch is pressed.
 AE, AF
VPWR V Displays the power supply voltage. A
VPWR_ST NORMAL/Fail
  • NORMAL: Power supply status to camera is normal.
  • Fail: Power supply status to camera is not normal.
 M, Q, U, Y
scientia non olet · About LEMON Manuals