DTC U0338-09: Error Signal Received From Start Stop Unit: Notes
DTC U0338:09 (FRONT BODY CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Error signal received from start stop unit |
| Detection Condition |
- Front body control module (FBCM) receives the CAN error signals from the start stop unit 3 times continuously with the ignition switched ON (engine off or on).
|
| Fail-safe |
- If DTC U0338:09 is detected when the ignition is switched ON (engine off or on), the headlight LO and the TNS (parking lights) are illuminated.
- If DTC U0338:09 is cleared, the headlight LO and the TNS (parking lights) are turned off, and the operation returns to normal.
|
| Possible Cause |
- DTCs are stored in the start stop unit.
- Light switch malfunction
- Start stop unit malfunction
- Front body control module (FBCM) malfunction
|
| System Wiring Diagram |
Not applicable |