DTC B1207-09: Error Signal Received From SAS Control Module: Notes
DTC B1207:09 (REAR BODY CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Error signal received from SAS control module |
| Detection Condition |
- The rear body control module (RBCM) detected the following conditions for 3 s or more with the ignition switched ON (engine off or on).
- A signal is received which cannot normally determine the collision conditions from SAS control module even though the collision detection unlock function presence signal received from the rear body control module (RBCM) determines that the function is present.
|
| Fail-safe |
Not applicable |
| Possible Cause |
- DTCs are stored in the SAS control module.
- SAS control module malfunction
|
| System Wiring Diagram |
Not applicable |