PID/Data Monitor Table [SAS Control Module (Standard Deployment Control System)]
PID/DATA MONITOR - SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)
| PID Name (Definition) | Unit/Operation | Operation Status (Reference) | |
|---|---|---|---|
| AB_WL (Air bag system warning light status) |
Lamp_Off/Lamp_On/Plant_Mode/Unknown |
|
|
| P_SEAT_M_S (Occupancy sensor) |
Off/On |
|
|
| RES_C_AB_D (Driver-side curtain air bag module resistance nominal) |
ohm | Continuous: 0.81-6.42 ohms | |
| RES_C_AB_P (Passenger-side curtain air bag module resistance nominal) |
ohm | Continuous: 0.81-6.42 ohms | |
| RES_F_AB1_D (Driver-side air bag module (inflator No. 1) resistance nominal) |
ohm | Continuous: 0.99-6.42 ohms | |
| RES_F_AB1_P (Passenger-side air bag module (inflator No. 1) resistance nominal) |
ohm | Continuous: 0.81-6.42 ohms | |
| RES_PCD_BAR (Poorly connected detector bar terminals resistance nominal (all of SAS control module connectors)) |
ohm |
|
|
| RES_R_PR_D (Driver-side rear pre-tensioner seat belt resistance nominal) |
NOTE:
|
||
| RES_R_PR_P (Passenger-side rear pre-tensioner seat belt resistance nominal) |
NOTE:
|
||
| RES_S_AB_D (Driver-side side air bag module resistance nominal) |
ohm | Continuous: 0.81-9.85 ohms | |
| RES_S_AB_P (Passenger-side side air bag module resistance nominal) |
ohm | Continuous: 0.81-9.85 ohms | |
| RES_SB_P_D (Driver-side pre-tensioner seat belt resistance nominal) |
ohm | Continuous: 0.81-6.42 ohms | |
| RES_SB_P_P (Passenger-side pre-tensioner seat belt resistance nominal) |
ohm | Continuous: 0.81-6.42 ohms | |
| SEAT_B_D (Driver-side buckle switch status) |
Unbuckled/Buckled |
|
|
| SEAT_B_P (Passenger-side buckle switch status) |
Unbuckled/Buckled | Occupant seated in passenger-side front seat: On |
|
| VPWR_IGA (SAS control module power voltage) |
V | Ignition switch is at ON: IG1 voltage | |