Boot Band Assembly Note

Assemble the boot band to the boot.
Crimp the boot band using the SST.

Fig 1: Crimping Boot Band Using SST
Courtesy of MAZDA MOTORS CORP.
Verify that the crimping clearance A is within the specification.
Standard clearance A

1. 5-2.5 mm {0.060-0.098 in}

If crimping clearance A exceeds the specification, reduce SST clearance, and crimp the boot band again.

If crimping clearance A is less than the specification, increase SST clearance, and crimp a new boot band.
Rotate the by hand and verify that it is securely installed to the boot band.