DTC Inspection (Retractable Fastback Control Module): Notes

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initialization screen of the M -MDS.
1. Select "Self Test".
2. Select "All CMDTCs".
Verify the DTC according to the directions on the screen.
- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection after recording the snapshot data. (See DTC TABLE (RETRACTABLE FASTBACK CONTROL MODULE) ).
After completion of repairs, clear all DTCs stored in the retractable fastback contol module. (See CLEARING DTC (RETRACTABLE FASTBACK CONTROL MODULE) ).