Front Camera Image Not Clear/No Image On Screen (360°View Monitor System): Notes
NOTE:
- The image range may differ depending on the road surface conditions and the vehicle conditions. In addition, the front camera cannot shoot images near the front bumper and below the front bumper.
- Under the following conditions, images captured by the front camera may be difficult to see, however this does not indicate a malfunction.
- Light from the sun or a vehicle's headlights is reflected off the lens
- The image area is dark due to low light levels such as in the evening
- The temperature around the lens increases or decreases
- Water droplets, snow, or mud is on the lens
- When all of the following conditions are met, the front monitor is displayed.
- Ignition switch ON (engine off or on)
- 360°view monitor switch ON
- Selector lever at not R position (ATX)
- Shift lever at not reverse gear position (MTX)