ODDTC Self Test
- Connect the M-MDS to the DLC-2.
- Verify the following vehicle conditions:
- All the switches are turned off (except the ignition switch).
- All the doors, hood, and trunk are closed.
- All the doors, and trunk are unlocked.
- All the seat belts are unbuckled.
- Electric parking brake switch is pulled.
- After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- Select "Self Test".
- Select "Modules".
- Select "F_BCM".
- Verify the DTC according to the directions on the screen.
- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection after recording the snapshot data.
- After completion of repairs, clear all DTCs stored in the front body control module (FBCM). (See CLEARING DTC (FRONT BODY CONTROL MODULE (FBCM)) .)