LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (On-Board Diagnostic - Two-Step Deployment Control System) >> DTC B10FD-55, B10FE-55: Configuration Setting Error (Side Air Bag Sensor Structural Malfunction) >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DTC B10FD:55/B10FE:55 SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.) DIAGNOSTIC PROCEDURE

Step Inspection Action
1 PERFORM SAS CONTROL MODULE CONFIGURATION (AS-BUILT DATA USE)
  • Perform the SAS control module configuration using the M-MDS.
  • Clear the DTC for the SAS control module using the M-MDS.
  • Perform the DTC inspection for the SAS control module using the M-MDS.
  • Are the same Pending DTCs present?
 Yes Go to the next step.
No DTC troubleshooting completed.
2 PERFORM SAS CONTROL MODULE DTC INSPECTION
  • Clear the DTC for the SAS control module using the M-MDS.
  • Perform the DTC inspection for the SAS control module using the M-MDS.
  • Are the same Pending DTCs present?
 Yes Repeat the inspection from Step 1.
  • If the malfunction recurs, replace the SAS control module.
No DTC troubleshooting completed.
scientia non olet · About LEMON Manuals