DTC U0010-88/U0100-00/U0131-00/U0155-00/U0214-00: Communication Error [Blind Spot Monitoring (BSM) Control Module]: Notes

DTC U0010:88/U0100:00/U0131:00/U0155:00/U0214:00 [BLIND SPOT MONITORING (BSM) CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE

Description	U0010:88 Module communication error (MS-CAN) U0100:00 Communication error with PCM U0131:00 Communication error with electric power steering (EPS) control module U0155:00 Communication error with instrument cluster U0214:00 Communication error with start stop unit
Detection condition	U0010:88 Blind spot monitoring (BSM) control module detected a CAN bus communication line (MS-CAN) malfunction for 1.4 s or more. U0100:00 Blind spot monitoring (BSM) control module cannot receive a CAN signal from the PCM for 5 s or more. U0131:00 Blind spot monitoring (BSM) control module cannot receive a CAN signal from the electric power steering (EPS) control module for 5 s or more. U0155:00 Blind spot monitoring (BSM) control module cannot receive a CAN signal from the instrument cluster. U0214:00 Blind spot monitoring (BSM) control module cannot receive a CAN signal from the start stop unit for 5 s or more.
Fail-safe	U0010:88 Blind spot monitoring (BSM) system is stopped. U0100:00 Blind spot monitoring (BSM) system is stopped. U0131:00 Blind spot monitoring (BSM) system is stopped. U0155:00 Blind spot monitoring (BSM) system is stopped. U0214:00 Blind spot monitoring (BSM) system is stopped.
Possible cause	Malfunction in CAN bus communication line Malfunction in CAN communication line between PCM and blind spot monitoring (BSM) control module Instrument cluster communication error (vehicle speed signal is not sent via instrument cluster from PCM) Malfunction in CAN communication line between electric power steering (EPS) control module and blind spot monitoring (BSM) control module Instrument cluster communication error (yaw rate signal is not sent via instrument cluster from DSC HU/CM) Malfunction in CAN communication line between instrument cluster and blind spot monitoring (BSM) control module Malfunction in CAN communication line between start stop unit and blind spot monitoring (BSM) control module Instrument cluster communication error (turn switch signal is not sent via instrument cluster from start stop unit)
System wiring diagram	Not applicable