DTC U2300-54: Configuration Data Not Received From Instrument Cluster [Blind Spot Monitoring (BSM) Control Module]: Notes
DTC U2300:54 [BLIND SPOT MONITORING (BSM) CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Configuration data not received from instrument cluster |
| Detection condition |
- Blind spot monitoring (BSM) control module cannot receive the configuration signal it is supposed to receive.
|
| Fail-safe |
- Blind spot monitoring (BSM) system is stopped.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the blind spot monitoring (BSM) control module to the blind spot monitoring (BSM) control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- DTCs are stored in the instrument cluster.
- Instrument cluster configuration not implemented
- Instrument cluster internal memory malfunction
- Blind spot monitoring (BSM) control module malfunction
|
| System wiring diagram |
Not applicable |