DTC U0513-68: Error Signal Received From DSC HU/Cm [Blind Spot Monitoring (BSM) Control Module]: Notes

DTC U0513:68 [BLIND SPOT MONITORING (BSM) CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE

Description	Error signal received from DSC HU/CM
Detection condition	Blind spot monitoring (BSM) control module receives the error signal from the DSC HU/CM for 1 s or more.
Fail-safe	Blind spot monitoring (BSM) system is stopped.
Possible cause	DTCs are stored in the DSC HU/CM. DSC HU/CM malfunction Blind spot monitoring (BSM) control module malfunction
System wiring diagram	Not applicable