LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> CX-9 Signature >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> On-Board Diagnostic - Parking Sensor Control Module >> DTC U2300-56: Configuration Data Unmatched With Instrument Cluster [Parking Sensor Control Module] >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

DTC U2300:56 (PARKING SENSOR CONTROL MODULE) DIAGNOSTIC PROCEDURE

Step Inspection Action
1 VERIFY OTHER PARKING SENSOR CONTROL MODULE DTCs
Yes Replace the parking sensor control module, then go to the Step 4.
(See PARKING SENSOR CONTROL MODULE REMOVAL/INSTALLATION .)
No Go to the next step.
2 VERIFY INSTRUMENT CLUSTER DTCs
Yes Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [INSTRUMENT CLUSTER] .)
No Go to the next step.
3 RESET INSTRUMENT CLUSTER CONFIGURATION DATA
Yes Using the M-MDS, perform the instrument cluster configuration (using As-Built data) again, then go to the next step. (See INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA) .)
No Go to Step 5.
4 VERIFY THAT REPAIRS HAVE BEEN COMPLETED
Yes Repeat the inspection from Step 1.
No Go to the next step.
5 VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?
Yes Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [PARKING SENSOR CONTROL MODULE] .)
No DTC troubleshooting completed.