DTC B0094-55: Configuration Setting Error (Driver-Side Crash Zone Sensor Structural Malfunction) [SAS Control Module (Standard Deployment Control System)]: Notes

DTC B0094:55 - SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Configuration setting error (driver-side crash zone sensor structural malfunction)
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. SAS control module configuration setting has not been done correctly Parts which have not been set to SAS control module are assembled
Fail-safe function	Not applicable
Possible cause	SAS control module configuration setting not implemented SAS control module configuration setting invalid Driver-side crash zone sensor assembly incorrect SAS control module malfunction
System wiring diagram	Not applicable