DTC B1413-55/B1417-55: Configuration Setting Error (Crash Zone Sensor Structural Malfunction) [SAS Control Module (Standard Deployment Control System)]: Notes
DTC B1413:55/B1417:55 - SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
- B1413:55: Configuration setting error (driver-side crash zone sensor structural malfunction)
- B1417:55: Configuration setting error (passenger-side crash zone sensor structural malfunction)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
- Parts which have not been set to SAS control module are assembled
|
| Fail-safe |
Not applicable |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |