DTC B0003-53: Operation (Deployment) Inhibited [SAS Control Module (Two-Step Deployment Control System)]: Notes
DTC B0003:53 - SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
- Operation (deployment) inhibited
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- The SAS control module configuration has not been set
- SAS control module configuration setting has not been done correctly
- The SAS control module configuration has been set, but air bag system is not normal
|
| Fail-safe function |
Not applicable |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration error
- Air bag system malfunction
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |