DTC B0072-55/B1228-55: Configuration Setting Error (Lap Pre-TENSIONER Seat Belt Structural Malfunction) [SAS Control Module (Two-Step Deployment Control System)]: Notes
DTC B0072:55/B1228:55 - SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
- B0072:55:Configuration setting error (passenger-side lap pre-tensioner seat belt structural malfunction)
- B1228:55:Configuration setting error (driver-side lap pre-tensioner seat belt structural malfunction)
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- SAS control module configuration setting has not been done correctly
- Parts which have not been set to SAS control module are assembled
|
| Fail-safe |
Not applicable |
| Possible cause |
- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Driver or passenger-side lap pre-tensioner seat belt assembly incorrect
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |