LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> CX-9 Touring, AWD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil/Ion Sensor Removal/Installation >> Ignition coil/ion sensor Removal Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition coil/ion sensor Removal Note

  1. Disconnect the connector and hoses shown in the figure.
    G11436404Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolts shown in the figure.
    Fig 1: Purge Solenoid Valve Component Bolts With Torque Specification
    G11436405Courtesy of MAZDA MOTORS CORP.
  3. Set the purge solenoid valve component aside as shown in the figure.
    G11436406Courtesy of MAZDA MOTORS CORP.
  4. Remove the ignition coil/ion sensors.
scientia non olet · About LEMON Manuals