September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Power Window SUBSWITCH Inspection: Notes
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)]
.)
- Remove the power window sub switch. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
- Verify that the resistance between power window sub switch terminals B and D is as indicated in the table.
 Courtesy of MAZDA MOTORS CORP.
|
RESISTANCE REFERENCE
| Switch Position |
Resistance (ohm) |
Terminal |
| Auto Down |
445.5-454.5 |
B-D |
| Auto Up |
683.1-696.9 |
| Manual Up |
1069.2-1090.8 |
- Verify that the continuity between the power window subswitch terminals C and D is as indicated in the table.
SWITCH POSITION CONTINUITY TERMINAL REFERENCE
| Switch Position |
Continuity Terminal |
| Manual Down |
C-D |