September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC U2300-55: Instrument Cluster Configuration Not Implemented: Notes
WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DTC U2300:55 (AUTO LEVELING CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Instrument Cluster Configuration Not Implemented |
| Detection condition |
- Auto leveling control module received a signal which indicates the instrument cluster configuration is not performed.
|
| Fail-safe |
- The headlight leveling actuator is stopped at the position when the malfunction is determined.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the auto leveling control module to the auto leveling control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- Instrument cluster configuration is not completed.
- Instrument cluster malfunction
- Auto leveling control module malfunction
|
| System wiring diagram |
Not applicable |