LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2020 >> CX-3 AWD >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag System (Service Information) - Two-Step Deployment Control System >> Air Bag Module And Pre-TENSIONER Seat Belt Deployment Procedures (Two-Step Deployment Control System) >> Deployment Procedure for Outside of Vehicle >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Deployment Procedure for Outside of Vehicle: Notes

  1. Inspect the SST (Deployment tool). (See INSPECTION OF SST (DEPLOYMENT TOOL) (TWO-STEP DEPLOYMENT CONTROL SYSTEM) .)
  2. Switch the ignition off.
  3. Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  4. Follow the procedure below for operating (deploying) the applicable air bag module, pre-tensioner seat belt or lap pre-tensioner seat belt.
    NOTE:
    • The connector part of the air bag module, pre-tensioner seat belt, and the SST (Adapter harness) burns out from the high heat when the inflator is operated (deployed).
scientia non olet · About LEMON Manuals