Collision from front of vehicle, frontal offset or side of vehicle
- Because a sensor is built into the SAS control module, once the following items have operated (deployed) due to a collision or other causes, the SAS control module must be replaced with a new one even if the used one does not have any visible external damage or deformation. The used SAS control module may have been damaged internally, which may cause improper operation. If the SAS control module is reused, the air bags, pre-tensioner seat belt and lap pre-tensioner seat belt may not operate (deploy) normally, which could result in a serious accident. Always replace the SAS control module with a new one.
- Driver-side air bag module
- Passenger-side air bag module
- Side air bag module
- Curtain air bag module
- Pre-tensioner seat belt
- Lap pre-tensioner seat belt