DTC B0001-55/B0010-55: Configuration Setting Error (Air Bag Module Structural Malfunction) (Airbag (Standard Deployment Control System)): Notes

DTC B0001:55/B0010:55 (SAS CONTROL MODULE - STANDARD DEPLOYMENT CONTROL SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	B0001:55: Configuration setting error (driver-side air bag module structural malfunction) B0010:55: Configuration setting error (passenger-side air bag module structural malfunction)
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. SAS control module configuration setting has not been done correctly Parts which have not been set to SAS control module are assembled
Fail-safe function	Not applicable
Possible cause	SAS control module configuration setting not implemented SAS control module configuration setting invalid Driver or passenger-side air bag module assembly incorrect SAS control module malfunction
System wiring diagram	Not applicable