DTC B00A0-28: Occupant Classification Sensor Calibration Setting Invalid (Airbag (Two-Step Deployment Control System)): Notes
DTC B00A0:28 (SAS CONTROL MODULE - TWO-STEP DEPLOYMENT CONTROL SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
- Occupant classification sensor calibration setting invalid
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Calibration set value not within valid range.
|
| Fail-safe |
- |
| Possible cause |
- Occupant classification sensor deformed or malfunction
- Weight acting on front passenger-side seat during calibration
- Improperly installed front passenger-side seat part at time of calibration
- Deformed floor where attached to front passenger-side seat
- Occupant classification sensor malfunction
- SAS control module malfunction
|
| System wiring diagram |
- |