DTC B00A0-54: Occupant Classification Sensor Calibration Setting Not Set (Airbag (Two-Step Deployment Control System)): Notes
DTC B00A0:54 (SAS CONTROL MODULE - TWO-STEP DEPLOYMENT CONTROL SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
- Occupant classification sensor calibration setting not set
|
| Detection condition |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Occupant classification sensor calibration setting has not been done correctly
|
| Fail-safe |
- |
| Possible cause |
- Occupant classification sensor calibration setting not implemented
- Occupant classification sensor calibration setting invalid
- Occupant classification sensor control module malfunction
|
| System wiring diagram |
- |