September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Pump Control Module Removal/Installation
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION
.)
- Remove the trunk side trim (LH). (See TRUNK SIDE TRIM REMOVAL/INSTALLATION
.)
- Disconnect the fuel pump control module connector.
- Remove in the order indicated in the table.
Courtesy of MAZDA MOTORS CORP. COMPONENT DESCRIPTION
| 1 |
Fuel pump control module |
| 2 |
Fuel pump control module bracket |
- Install in the reverse order of removal.